How do I install the Rhino WD3PR-FL KammBar Fleet System on my vehicle? (RHINO WD3PR-FL KammBar Fleet system Instruction Guide)

Answer

manuals.plus

Mar 06, 2025 - 09:44 PM

To install the Rhino WD3PR-FL KammBar Fleet System on your vehicle, please follow the step-by-step instructions provided in the installation manual. Here is a general overview of the installation process:

1. Start by ensuring that you have all the necessary components and tools for the installation. The components should include the KammBar crossbars, fitting kits, and any additional accessories.

2. Carefully read through the installation instructions provided in the manual. Familiarize yourself with the different parts and their functions.

3. Clean the roof of your vehicle thoroughly to ensure proper adhesion of the fitting kits. Remove any dirt, debris, or wax that may hinder the installation process.

4. Position the fitting kits on the roof of your vehicle according to the instructions. Ensure that they are aligned properly and evenly spaced.

5. Attach the fitting kits securely to the roof using the provided hardware. Follow the specific instructions for tightening the bolts or screws to the recommended torque.

6. Once the fitting kits are securely attached, place the KammBar crossbars onto the fitting kits. Make sure they are aligned properly and centered on the vehicle.

7. Secure the KammBar crossbars to the fitting kits using the provided hardware. Again, follow the specific instructions for tightening the bolts or screws to the recommended torque.

8. Double-check all the connections and ensure that everything is tightened properly. Verify that the KammBar crossbars are securely attached to the fitting kits.

9. After installation, test the stability and security of the KammBar Fleet System by gently shaking or applying slight pressure. If any components feel loose or unstable, recheck the installation and tighten as necessary.

Please note that this is a general overview of the installation process. It is crucial to refer to the specific instructions provided in the Rhino WD3PR-FL KammBar Fleet System installation manual for accurate and detailed instructions tailored to your specific vehicle model.