User Manual Q&AAnswer
Mar 06, 2025 - 09:44 PM
To assemble the Best Quality Furniture 9749 Venetian 4-Piece Champagne Eastern King Bedroom Set, follow the instructions provided in the assembly manual. Here is a step-by-step guide:
1. Start by securing the Bun Foot (B) to the bottom of the Dresser (A) using the provided hardware (Allen Key, ICBC I Boulon-M6 x 20mm, M6 Spring Washer, and M6 Flat Washer). Refer to the diagram for guidance.
2. Next, secure the Metal Leg (C) to the bottom of the Dresser (A) using the provided hardware.
3. Secure the Center Leg (D) to the bottom of the Dresser (A) as shown in the diagram.
For the Dresser & Mirror Wiled Light assembly:
1. Place the Mirror (B) on top of the Dresser (A) and align it to the center. Tighten it using the provided JCBC 35mm screws, Spring Washers, and Flat Washers.
For the King Headboard Wiled Light assembly:
1. Attach the Headboard Post (B) to the Headboard (A) using the provided JCBC40mm screws, Spring Washers, and Flat Washers.
For the King Bed with 13 Slats assembly:
1. Secure the Bun Foot (L) to the bottom of the Footboard (B).
2. Attach the Side Rail (C) to the Headboard (A) and Footboard (B).
3. Attach the Drawer Support Rail (K) to the Side Rail (C) using the provided JCBC 16mm screws, Spring Washers, and Flat Washers.
4. Attach the Drawer Base Panel (E) to the Footboard (B) using the provided JCBC 35mm screws, Spring Washers, and 1/4" Flat Washers.
5. Tighten the Drawer Base Panel (E) to the Drawer Support Rail (K) using the provided JCBC 35mm screws and Spring Washers.
6. Attach the Drawer Support Leg (H) to the Drawer Support Rail (K) using the provided JCBC 35mm screws, Spring Washers, and Flat Washers. Adjust the Adjustable Leveller (9) to level the bed with the floor.
7. Insert the Drawer (D) into the Footboard (B).
8. Secure the Roll Slat (F) using the provided 32mm screws.
9. Attach the Slat Support Leg (G) and Center Vertical Slat (J) to the bottom of the Roll Slat (F) using the provided JCBC 60mm screws and Spring Washers. Adjust the Adjustable Leveller (9) to level the bed with the floor.
10. Attach the Slat Cover Panel (I) to the top of the slat close to the footboard using the provided 16mm screws.
For the Night Stand assembly:
1. Secure the Bun Foot (B) to the bottom of the Night Stand (A) using the provided hardware.
2. Secure the Metal Leg (C) to the bottom of the Night Stand (A) using the provided hardware.
Please refer to the assembly manual for more detailed instructions and diagrams.
Add New Comment