User Manual Q&AAnswer
Mar 06, 2025 - 09:43 PM
To install the Rhino VC3PR-FL KammBar Fleet System, please follow the steps outlined in the installation instructions provided with the product. Here is a general overview of the installation process:
1. Ensure that you have all the necessary parts and tools included in the package. Refer to the part list provided to confirm.
2. Start by positioning the KammBar Fleet System on the roof of your vehicle. Make sure it is centered and aligned properly.
3. Use the provided brackets and fixings to secure the KammBar to the roof. Follow the specific instructions for your vehicle model, as different vehicles may require different installation methods.
4. Tighten the fixings securely, ensuring that the KammBar is firmly attached to the roof. Double-check for any loose connections.
5. Once the KammBar is securely installed, you can now attach any additional accessories or load carrying equipment, such as roof racks or ladder clamps, as required. Refer to the specific instructions for each accessory for proper installation.
6. After installing all the necessary accessories, make sure to check the entire system for stability and ensure that everything is properly secured.
Please note that these are general installation guidelines, and it is essential to refer to the detailed installation instructions provided with the Rhino VC3PR-FL KammBar Fleet System for your specific vehicle model. If you encounter any difficulties or have further questions, it is recommended to contact Rhino Products Ltd directly for assistance.
Add New Comment