How do I install the Rhino TC2PR-FL KammBar Fleet System on my vehicle? (RHINO TC2PR-FL KammBar Fleet system Instruction Guide)

Answer

manuals.plus

Mar 06, 2025 - 09:42 PM

To install the Rhino TC2PR-FL KammBar Fleet System on your vehicle, please follow the steps outlined in the product manual. Here is a step-by-step guide:

1. Start by gathering all the necessary tools for installation. These may include a wrench, socket set, drill, and measuring tape.

2. Before installation, ensure that the vehicle roof is clean and free from any dirt or debris. This will help in achieving a secure and stable fit.

3. Position the KammBar Fleet System on the roof of your vehicle, ensuring that it is centered and aligned with the roof rails or fixing points. Take measurements to ensure equal spacing on both sides.

4. Once the positioning is confirmed, mark the locations where the KammBar feet will be attached to the roof. Use a measuring tape to ensure accurate placement.

5. Using a drill, create pilot holes at the marked locations. Make sure the holes are of the appropriate size for the mounting hardware provided with the KammBar Fleet System.

6. Attach the KammBar feet to the roof using the mounting hardware. Tighten the bolts securely, but be careful not to overtighten and damage the vehicle roof.

7. Repeat the process for all the KammBar feet, ensuring that they are evenly spaced and securely fastened.

8. Once all the KammBar feet are installed, place the KammBars onto the feet. Align them properly and ensure they are securely attached.

9. Double-check the installation to ensure everything is properly aligned and tightened. Make any necessary adjustments if needed.

10. After installation, it is recommended to test the stability and security of the KammBar Fleet System by applying gentle pressure and checking for any movement or looseness. If any issues are found, recheck the installation steps or consult a professional.

For more detailed instructions and illustrations, please refer to the Rhino TC2PR-FL KammBar Fleet System manual provided with the product. If you encounter any difficulties or have further questions, you can contact Rhino Products directly at the provided phone number or email address for additional support.