How do I install the Rhino T54PR-FL KammBar Fleet System? (RHINO T54PR-FL KammBar Fleet system Instruction Guide)

Answer

manuals.plus

Mar 06, 2025 - 09:41 PM

To install the Rhino T54PR-FL KammBar Fleet System, please follow the steps outlined in the provided manual. Here is a general overview of the installation process:

1. Ensure that you have received all the components listed in the "WHAT'S IN THE BOX" section, including the KammBar Pro, KammBar Fleet, and the Fitting Kit.

2. Start by thoroughly reading the installation instructions provided in the manual. Familiarize yourself with the components and the installation process before beginning.

3. Before installation, make sure the vehicle's roof is clean and free from any debris or dirt that may interfere with the installation process.

4. Begin by installing the KammBar Pro. This component is designed to fit onto the vehicle's roof. Follow the instructions in the manual to securely attach the KammBar Pro using the provided fittings.

5. Once the KammBar Pro is installed, proceed to install the KammBar Fleet. This component is designed to fit onto the KammBar Pro. Again, refer to the manual for detailed instructions on how to attach the KammBar Fleet securely.

6. Ensure that all fittings are tightened properly to prevent any movement or instability during use.

7. After installation, double-check that all components are securely attached and that the system is stable.

Please note that the above instructions are a general overview and it is important to refer to the specific instructions provided in the manual for your Rhino T54PR-FL KammBar Fleet System. If you encounter any difficulties or have further questions, it is recommended to contact Rhino Products Ltd directly for assistance.