User Manual Q&AAnswer
Mar 06, 2025 - 09:40 PM
To reverse the door on the eurotech ED-RF211SS.2 Litre Fridge Freezer, you will need a straight screwdriver, cross screwdriver, spanner, and the components included in the poly bag. Here are the steps to follow:
1. Close the upper door and remove the xxxx from the top hinge covers using a cross screwdriver. Take off the hinge cover and unscrew the top hinge to remove the upper door.
2. Unscrew the middle hinge using a cross screwdriver and remove the lower door.
3. Lay down the refrigerator and remove the adjusting feet. Unscrew the lower hinge using a cross screwdriver.
4. Unscrew and remove the bottom hinge pin, turn the bracket over, and replace it.
5. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet. Transfer the lower door to the proper position.
6. Make the middle hinge reverse the direction 180 degrees, then transfer it to the left proper position. Place the middle hinge pin in the upper hole of the lower door and tighten the screws.
7. Remove the right middle stopper with the metal block from the bottom of the upper door. Install the left middle stopper and metal block in the left side of the bottom of the upper door.
8. Install the upper door and fix the upper door hinge onto the cabinet.
9. Take the left hinge cover from the accessory bag and install it with the top hinge. Then install the hole cover on the right side.
Please refer to the manual for visual illustrations and additional details.
Add New Comment