User Manual Q&AAnswer
Mar 06, 2025 - 09:38 PM
Sure! Here is a step-by-step guide on how to install the Harbor Breeze 84060 52 Inch The Stokes Ceiling Fan:
1. Turn off the circuit breakers and wall switch to the fan supply line leads to ensure safety.
2. Determine the mounting method you want to use. You can choose between downrod-style mounting, angle-style mounting, or closemount mounting, depending on your ceiling height and type.
3. Make sure the blades will be at least 30 inches from any obstruction and that the downrod length will ensure the blades are at least 7 feet above the floor.
4. Secure the mounting bracket to the outlet box using the screws, spring washers, and flat washers provided with the outlet box. Make sure to use the proper hardware for a secure installation.
5. If using the angle mount, ensure that the open end of the mounting bracket is facing the higher point of the ceiling and that the ceiling angle is not steeper than 18°.
6. Remove the hanger ball from the downrod by loosening the hanger ball set xxxx and removing the cross pin. Slide the hanger ball off the downrod.
7. Loosen the two set screws from the fan motor assembly coupling and remove the hitch pin and lock pin from the fan motor assembly.
8. Feed the fan wires up through the downrod and thread the downrod into the fan motor assembly coupling. Line up the holes and replace the lock pin and hitch pin. Tighten the set screws.
9. Slip the coupling cover, canopy cover, and canopy onto the downrod.
10. Reinstall the hanger ball onto the downrod, ensuring that the cross pin is in the correct position and the set screws are tight.
11. Lift the fan motor assembly into position and place the hanger ball into the mounting bracket. Rotate the fan motor assembly until the check groove drops into the registration slot and seats firmly.
12. Make the electrical connections by following the instructions provided in the manual. Ensure that the power is turned off at the circuit breaker or main fuse box before wiring. Use wire nuts and electrical tape to secure the connections.
13. Once the electrical connections are made, replace the xxxx in the mounting bracket and loosen the other xxxx . Raise the canopy up to the mounting bracket and rotate it clockwise to secure it. Attach the canopy cover to the canopy using its magnetic feature.
14. Install the fan blades by aligning the holes on the blades with the holes on the flywheel. Use the blade screws and metal washers to attach the blades securely.
15. Install the 14 W LED assembly by snapping the wire connection plugs together and twisting it tightly to the switch box.
16. Finally, test the fan and light by using the remote control provided. The remote control has buttons to control the fan speed, turn the fan and light on/off, and change the color temperature of the light.
Please note that this is a general guide, and it is important to refer to the specific instructions provided in the Harbor Breeze 84060 52 Inch The Stokes Ceiling Fan Instruction Manual for accurate and detailed installation steps.
Add New Comment