How do I install and mount the STAHL 136692 Ex e Terminal Box? (STAHL 136692 Ex e Terminal Box Owner's Manual)

Answer

manuals.plus

Mar 06, 2025 - 09:31 PM

To install and mount the STAHL 136692 Ex e Terminal Box, please follow the instructions provided in the owner's manual. Here is a step-by-step guide:

1. Determine the desired location for the terminal box and ensure it meets the necessary safety requirements for the specific application.

2. Ensure that the ambient temperature range is within the specified limits (-60 °C to +40 °C for T6 or -60 °C to +55 °C for T5).

3. Make sure the terminal box is free from any damage or defects before installation.

4. Choose the appropriate entry installation option for the sides of the enclosure. The manual states that this particular model does not have drilled holes for entries, so you may need to create them based on your specific requirements.

5. Decide whether you want to equip the terminal box with a flange on one or more enclosure sides. If required, refer to the spare parts section of the manual for the necessary flange dimensions and part numbers.

6. Determine the type and size of terminals you need for your application. The manual mentions that the terminal box is equipped with 1 x Phoenix MBK terminal, which is a 2-conductor terminal with a cross-section of 2.5 mm² and color grey.

7. Ensure that the cover screws are tightened properly. The manual specifies a tightening torque of 4.5 Nm for the cover xxxx 1.

8. Once the terminal box is mounted and all the necessary components are installed, you can connect the appropriate electrical cables to the terminals and secure them according to the specified connection cross-section (4 mm² or AWG 12).

Please note that this is a general guide, and it is important to refer to the specific instructions provided in the owner's manual for accurate installation and mounting procedures.