User Manual Q&AAnswer
Mar 06, 2025 - 09:24 PM
To install the FISHER PAYKEL TKOR364X1 Rear Trim Kit for Gas Freestanding Range, 36 inch, please follow the steps below:
1. Ensure that the gas range is turned off and disconnected from the power source before starting the installation process.
2. Place the rear trim kit on a flat surface near the gas range.
3. Align the rear trim kit with the back of the gas range, ensuring that it is centered and level.
4. Use a screwdriver or a suitable tool to secure the rear trim kit to the gas range. Refer to the user manual for the specific xxxx size and location.
5. Once the rear trim kit is securely attached, double-check its alignment and make any necessary adjustments.
6. Reconnect the gas range to the power source and turn it on to ensure that it is functioning properly.
Please note that these installation instructions are a general guide. For detailed and model-specific instructions, it is recommended to refer to the user guide provided with the FISHER PAYKEL TKOR364X1 Rear Trim Kit or contact Fisher & Paykel's Customer Care Centre at 1.888.936.7872 for further assistance.
Add New Comment