User Manual Q&AAnswer
Mar 06, 2025 - 09:21 PM
To install the MiBOXER TR-C1ZR AC Triac Dimmer, please follow these steps:
1. Before installation, make sure to turn off the power supply.
2. Check and ensure that all cables are correctly connected before turning on the dimmer to avoid damage.
3. The dimmer supports various control solutions, including Zigbee 3.0, 2.4G RF wireless remote control, and push dimming.
4. If you want to use smartphone app control, you will need to purchase a Zigbee 3.0 gateway and follow the instructions provided with the gateway.
5. The dimmer can be installed in a standard junction box that complies with EU/USA standards.
6. The connection diagram provided in the manual shows how to connect the dimmer to the power supply and the LED lights or other compatible lamps.
7. Pay attention to the "Breaker Mode" feature, which allows you to turn on/off the light without dimming. To activate or deactivate this mode, follow the instructions provided in the manual.
8. The dimmer also supports push dimming. Short pressing the push switch will turn the light on/off, while long pressing the push switch will enable stepless dimming. Release your finger and repeat the long pressing to increase or decrease the brightness.
9. If you have multiple dimmers connected to the same self-return switch, you can ensure they have the same brightness level by long pressing the switch for 20 seconds until all lights reach 100% brightness. Note that the maximum number of dimmers connected to the same self-return switch should not exceed 25, and the connection cable should not exceed 20m.
10. The dimmer can be controlled using the provided RF remote control. Follow the instructions in the manual to link the remote control to the dimmer or unlink it if needed.
11. If you want to set up the minimum brightness level using the remote control, follow the instructions provided in the manual for the specific remote control model you have.
12. The dimmer supports auto transmitting, which means one light can transmit signals from the remote control to another light within 30m. All dimmers must be linked with the same remote control for this feature to work.
13. If you want to control the dimmer using a smartphone app, you need to add a Zigbee 3.0 gateway to the "TUYA Smart" app. Follow the instructions provided with the gateway and the app to pair the dimmer with the app and enjoy features like dimming and group control.
14. The dimmer can also be integrated with Philips Hue for control through the Philips Hue app. Follow the instructions provided in the manual to pair the dimmer with the Philips Hue app.
15. Voice control is possible with Alexa or Google Home. If your Amazon Echo device has built-in Zigbee 3.0 protocol, you can connect the dimmer directly. Otherwise, you need to add the dimmer to the MiBoxer Zigbee 3.0 gateway and follow the instructions in the manual to set up voice control through Alexa or Google Home.
16. Finally, please note the safety precautions mentioned in the manual, such as turning off the power supply before installation, ensuring the input voltage matches the device requirements, and avoiding installation in places with a wide range of metal areas or strong electromagnetic waves that can affect the remote control distance.
Add New Comment