User Manual Q&AAnswer
Mar 06, 2025 - 09:20 PM
To install the Promitto LIGHTING SafeLight 3000K Powerful LED Strip, please follow these steps:
1. Ensure that the power is turned off before starting the installation process.
2. Unroll the LED strip from the drum completely before use, as stated in the warning section of the user manual.
3. Decide on the desired location for the LED strip installation. The strip is suitable for both indoor and outdoor use.
4. Clean the installation surface to ensure proper adhesion. The surface should be dry, smooth, and free from dust or grease.
5. Peel off the adhesive backing from the LED strip and carefully press it onto the installation surface. Ensure that the strip is straight and aligned correctly.
6. If needed, you can cut the LED strip at designated cutting points, marked at regular intervals. Be sure to cut only on the marked lines to avoid damaging the strip.
7. Connect the LED strip to a suitable power source. The Promitto LIGHTING SafeLight 3000K Powerful LED Strip is designed to connect directly to a 230V power supply.
8. If you wish to extend the length of the LED strip, you can interconnect multiple strips together. The maximum interconnected length is 150 meters.
9. After installation, you can use a compatible dimmer to adjust the brightness of the LED strip if desired. The Promitto LIGHTING SafeLight 3000K Powerful LED Strip is dimmable.
Please refer to the user manual for additional information and safety precautions.
Add New Comment