User Manual Q&AAnswer
Mar 06, 2025 - 09:12 PM
To install the FISHER and PAYKEL HPB12048-2 120cm Integrated Insert Rangehood in your kitchen cabinetry, follow these steps:
1. Measure and mark the desired location for the rangehood in your cabinetry. Ensure that there is enough space for the rangehood's dimensions (Height: 462mm, Width: 1180mm, Depth: 480mm).
2. Use the adjustable mounting system provided with the rangehood to secure it in place. Follow the installation guide provided for detailed instructions on how to adjust and secure the rangehood.
3. Connect the rangehood to the ducting system. This rangehood is designed for vertical ducting only. Ensure that the ducting is properly aligned and connected to the rangehood for effective extraction.
4. Once the rangehood is securely installed and connected to the ducting, you can proceed with electrical connections. Ensure that the power supply voltage is 230V.
5. After installation, refer to the user guide for instructions on how to operate the rangehood. The rangehood features electronic controls with LED-illuminated, soft-touch buttons. There is also a remote control included for convenience.
Please note that these installation instructions are a general guide. It is always recommended to refer to the specific installation guide provided with the product for detailed and accurate instructions.
Add New Comment