User Manual Q&AAnswer
Mar 06, 2025 - 09:02 PM
To trace network cables using the NOYAFA NF-825TMR Strong Electricity Cable Tracker, follow these steps:
1. Turn on the device by sliding the switch to the "Network cable tracking" position.
2. Connect one end of the RJ45 network cable to the tracking port on the transmitter.
3. Press the "Tracking" button on the transmitter to start the tracking process.
4. The power indicator on the transmitter will turn green.
5. Use the receiver to track the network cable. When the probe on the receiver approaches the cable, the indicator on the receiver will turn green and give off a sound.
6. Adjust the sensitivity of the receiver to accurately locate the position of the cable.
Note: Make sure the device is not plugged into a power socket while tracking network cables to avoid weakening the signal.
For more detailed instructions and illustrations, please refer to the NOYAFA NF-825TMR Strong Electricity Cable Tracker User Manual.
Add New Comment