User Manual Q&AAnswer
Mar 06, 2025 - 08:45 PM
To install the STAHL 254811 Earth Tags, please follow the steps below:
1. Ensure that the equipment or device you are installing the Earth Tags on is properly grounded and de-energized.
2. Identify the appropriate location for installing the Earth Tags. It should be a suitable metallic surface that allows for a secure connection.
3. Clean the surface area where the Earth Tags will be installed to remove any dirt, grease, or other contaminants that may affect the connection.
4. Take the Earth Tags and align the inner diameter (D) with the desired location on the surface.
5. Insert the Earth Tags into the surface, ensuring that the thread (outer) (d1) engages securely.
6. Use a suitable tool to tighten the Earth Tags onto the surface. Ensure that it is tightened sufficiently to provide a solid electrical connection.
7. Once the Earth Tags are securely installed, verify the connection by conducting appropriate electrical tests to ensure proper grounding.
Please note that this is a general guide for installing the STAHL 254811 Earth Tags. For specific installation instructions or any additional information, we recommend referring to the owner's manual or contacting the manufacturer directly.
Add New Comment