How do I install the STAHL 254812 Earth Tags? (STAHL 254807 Earth Tags Owner's Manual)

Answer

manuals.plus

Mar 06, 2025 - 08:38 PM


To install the STAHL 254812 Earth Tags, please follow the steps below:

1. Ensure that the power supply is turned off before starting the installation process.

2. Identify the location where you want to install the earth tag. It should be a suitable location for effective grounding.

3. Prepare the surface by cleaning it to remove any dirt, grease, or other contaminants.

4. Take the earth tag and align it with the chosen location. Make sure the threaded portion is facing outward.

5. Insert the threaded portion of the earth tag into the designated hole or opening. Apply gentle pressure and rotate it clockwise to secure it in place.

6. Use a suitable tool, such as a wrench or pliers, to tighten the earth tag until it is firmly fixed.

7. Once the earth tag is securely installed, check for any loose connections or gaps. Ensure that it is properly aligned and flush with the surface.

8. After installation, you can connect the earth tag to the grounding system according to the specific requirements of your application. Please refer to the relevant electrical codes and regulations for proper grounding procedures.

Please note that this is a general guide for installing the STAHL 254812 Earth Tags. For more detailed instructions and safety precautions, we recommend referring to the owner's manual provided with the product.