User Manual Q&AAnswer
Mar 06, 2025 - 08:29 PM
To install the STAHL 109085 PVC-Shroud, please follow the instructions below:
1. Ensure that the area where the shroud will be installed is clean and free from any debris or obstructions.
2. Identify the cable or conduit that needs to be protected and determine the appropriate size of the shroud required.
3. Slide the shroud over the cable or conduit, starting from one end and working your way along its length. Ensure that the shroud is fully covering the cable or conduit.
4. If necessary, use cable ties or other fastening methods to secure the shroud in place. Make sure the shroud is securely fastened and does not move or slide.
5. Repeat the above steps for any additional cables or conduits that require protection.
6. Once the shroud is installed, visually inspect it to ensure that it is properly fitted and there are no gaps or loose sections.
Please note that the above instructions are a general guide and may vary depending on the specific installation requirements. It is always recommended to consult the manufacturer's manual or contact their customer support for any specific installation questions or concerns.
Add New Comment