User Manual Q&AAnswer
Mar 06, 2025 - 08:27 PM
To install the , please follow the steps below:
1. Ensure that the area where the shroud will be installed is clean and free from any debris or obstructions.
2. Identify the cable or conduit that needs to be protected and determine the appropriate size of the shroud required.
3. Slide the shroud over the cable or conduit, starting from one end and working your way to the other end.
4. Ensure that the shroud is securely fitted and covers the entire length of the cable or conduit.
5. If necessary, use cable ties or other suitable fasteners to secure the shroud in place.
6. Verify that the shroud is properly installed and provides adequate protection for the cable or conduit.
Please note that the above instructions are general guidelines for installing the PVC-Shroud. For specific installation details or if you encounter any difficulties during the installation process, we recommend referring to the STAHL 109078 PVC-Shroud Owner's Manual or contacting the manufacturer directly for further assistance.
Add New Comment