Answer

Mar 06, 2025 - 08:23 PM
To install the STAHL 254813 Earth Tags, follow these steps:
1. Ensure that the equipment or device you are installing the earth tags on is powered off and disconnected from any power source.
2. Identify a suitable location on the equipment where the earth tags can be securely attached. This location should have a clean and flat surface.
3. Clean the surface area where the earth tags will be installed using a suitable cleaning agent to remove any dirt, grease, or other contaminants.
4. Take the earth tags and align the inner diameter (D) of the tags with the M6 thread on the equipment.
5. Insert the earth tags into the M6 thread and rotate them clockwise until they are securely tightened. Use an appropriate tool, such as a wrench, to ensure a tight fit.
6. Once the earth tags are securely installed, verify that they are properly aligned and positioned. Ensure that there is good contact between the earth tags and the equipment's surface.
7. After installation, double-check all connections and ensure that there are no loose or damaged components.
Note: It is essential to follow any additional instructions or guidelines provided by the equipment manufacturer or relevant safety regulations when installing earth tags. If you are unsure about the installation process, it is recommended to consult a qualified electrician or technician for assistance.
Add New Comment