How do I install the Fisher Paykel Professional Square Handle Kit on my freestanding range? (FISHER PAYKEL Professional Square Handle Kit User Guide)

Answer

manuals.plus

Mar 06, 2025 - 08:13 PM

To install the Fisher Paykel 71107 Professional Square Handle Kit on your freestanding range, please follow these steps:

1. Ensure that the range is turned off and unplugged from the power source before starting the installation process.

2. Locate the two pieces of the handle kit included in the package.

3. Take the longer handle piece (31 11/16" width) and align it with the pre-drilled holes on the door of your range. Make sure the handle is positioned correctly and level.

4. Insert the provided screws through the holes on the handle and into the corresponding holes on the door. Use a screwdriver to tighten the screws securely, but be careful not to overtighten.

5. Take the shorter handle piece (15 39/64" width) and align it with the pre-drilled holes on the drawer of your range. Again, ensure that the handle is positioned correctly and level.

6. Insert the provided screws through the holes on the handle and into the corresponding holes on the drawer. Use a screwdriver to tighten the screws securely.

7. Once both handle pieces are securely attached, double-check their alignment and make any necessary adjustments.

8. Plug the range back into the power source and turn it on to test the functionality of the newly installed handle.

Please note that these instructions are a general guide and may vary slightly depending on your specific model. For detailed and model-specific instructions, we recommend referring to the user manual provided with your Fisher Paykel 71107 Professional Square Handle Kit.