User Manual Q&AAnswer
Mar 06, 2025 - 08:13 PM
To install the Q-TRAN LALO-FLATE-ID Linear Fixture using the VHB adhesive mounting method, follow these steps:
1. Ensure that the surface where the fixture will be installed is thoroughly cleaned and dried for maximum bond strength.
2. Determine the location and positioning of the fixture on the desired surface before adhering it. Make any necessary reference markings to indicate the fixture placement.
3. Peel back the white film from the VHB adhesive tape while evenly applying the tape to the mounting side of the fixture. The red side of the tape should be visible.
4. Remove the red film from the VHB adhesive tape and position the fixture in place according to your previous reference markings.
5. Remove the protective film from the surface of the fixture's lens.
Optional: For improved bonding strength, you can apply a small amount of epoxy at each end of the fixture. Refer to the suggested epoxies table in the manual for suitable options. Follow the manufacturer's instructions for the epoxy application.
Please note that these instructions are a summary of the installation process using the VHB adhesive mounting method. For more detailed instructions and illustrations, please refer to the Q-TRAN LALO-FLATE-ID Linear Fixture Instruction Manual provided
Add New Comment