User Manual Q&AAnswer
Mar 06, 2025 - 08:06 PM
To install the Kogan KA26VAC90EB 90cm Extension Bracket, please follow the steps outlined in the user guide:
1. Using a Phillips head screwdriver, remove the two plate fixing screws and nuts from the fixing plate at the bottom of the standard frame. Remove the fixing plate.
2. Align the holes on the fixing plate onto those on the bottom of the extension bracket. Secure the plate fixing screws and nuts to attach the fixing plate to the extension bracket.
3. Use a Phillips head screwdriver to remove the four bottom plate fixing screws on the standard frame. This will detach the bottom of the standard mounting bracket.
4. Align the holes on the side of the extension bracket with those on the side of the standard frame. Use a Phillips head screwdriver to secure the four fixing screws through the holes, connecting the extension bracket to the standard frame. If the screws are broken, use the included 10mm ST5 screws.
5. Using two 10mm ST4 screws, connect the top plate of the extension bracket to the bottom plate of the standard frame.
6. Once attached, follow the installation method found in the user guide for the Kogan 2.6kW Vertical Window Air Conditioner. Note that instead of attaching the bottom of the standard frame to the window, the bottom of the extension bracket is attached instead.
For more detailed instructions and illustrations, please refer to the user guide provided with the product.
If you require further assistance or have any additional questions, you can visit help.kogan.com for the most up-to-date guide and support.
Add New Comment