User Manual Q&AAnswer
Mar 06, 2025 - 08:03 PM
To assemble the OPCOM Grow Wall 3 Vertical Hydroponic Unit, please follow these steps:
1. Remove all the parts from the box and check all the accessories.
2. Assemble the left and right three short columns into two left and right columns.
3. Hang the four planting grooves on the four screws of different heights on the column and fasten them with a pull buckle to fix them.
4. Place the top beam on the top of the column and fix it with a buckle.
5. Assemble two wall brackets in a rotating manner behind the top beam and stick them to the wall using the double-sided tape.
6. Rotate the downspout up and down and disassemble it into an upper downspout and a lower downspout.
7. After nesting, insert the upper downspout with metal gaskets and waterproof gaskets through the drain hole at the bottom of the planting groove. Rotate the lower downspout from the bottom of the planting groove to the upper downspout tightly.
8. Hang the L-shaped hard pipe of the upper water pipe on the right side of the uppermost planting groove. Pass the hose below the L-shaped hard pipe through the pipe groove of the right column. Nest the end of the hose over the port on the right side of the water tank above the pump pack.
9. Put four filter sponges on the upper downspout in the four planting grooves, one filter sponge on the filter in the water tank, and cover the four planting trays on the four planting grooves respectively.
10. Lock the four LED grow lights to the four light arms using the screws you removed from two sides of the LED grow lights.
11. Connect the 6 round hole plugs plugged into the main line of the control box to the fan (Fan), the motor (Pump), and the 4 LED growth lights respectively. Insert the power supply plug of the control box into the socket. Insert the cable tie terminal corresponding to the main line into the corresponding hole of the right column.
For a visual guide, you can also refer to the detailed user guide video on the OPCOM Farm website at http://www.opcomfarm.com.
Add New Comment