User Manual Q&AAnswer
Mar 06, 2025 - 08:01 PM
To install the ACASIS AC-4SDI Quad SDI PCIE Video Capture Card on your computer, please follow these steps:
1. Turn off your computer and disconnect all power cables.
2. Insert the PCle capture card into the PCle-X4 Gen2 slot of your host computer, making sure it is firmly seated.
3. Connect the signal source (SDI interface device) to the PCle card interface. You can connect up to four SDI interface devices at the same time.
4. Reconnect all power cables and start up the computer.
5. Install the ACASIS PCle capture card driver by downloading it from the ACASIS website (http://www.acasis.com/download_drivers/).
6. Open the driver installation source folder and double click on the "Drvlnstall_X64" program.
7. A pop-up window will appear showing "Find Video Capture Card Driver: 1", indicating that one capture card has been recognized.
8. Click "Install". After the installation is complete, a notification will appear to confirm the successful installation. Click "OK" to finish the installation.
For further assistance or technical support, you can contact ACASIS through their support email (support@acasis.com) or visit their website (www.acasis.com).
Add New Comment