User Manual Q&AAnswer
Mar 06, 2025 - 07:55 PM
To change the application tool on the BOSCH AdvancedMulti 18 Cordless Multifunction Tool, follow these steps:
1. Ensure that the battery is removed from the power tool before starting any work.
2. Open the AutoClic lever located on the power tool to unlock the current application tool. The lever should be opened all the way.
3. The current application tool will be ejected automatically. Remove it from the power tool.
4. Place the new application tool (e.g., plunge cut saw blade, sanding plate, etc.) on a level surface with the depressed center facing down. Make sure you can read the text on the application tool from above.
5. Press the power tool onto the application tool at the required angle until it audibly engages. Ensure that the application tool is seated securely.
6. Check that the application tool is firmly fixed in place. It should not come loose during operation.
Note: It is recommended to wear protective gloves when changing application tools to avoid any risk of injury.
Please refer to the BOSCH AdvancedMulti 18 Cordless Multifunction Tool Instruction Manual for more detailed instructions and illustrations.
Add New Comment