How do I install the TRIO 9960-07 Earth Spike? (TRIO 9960-07 Earth Spike Owner's Manual)

Answer

manuals.plus

Mar 06, 2025 - 07:50 PM

To install the TRIO 9960-07 Earth Spike, please follow the steps below:

1. Choose a suitable location: Select a spot in your outdoor area where you want to install the Earth Spike. Ensure that the ground is stable and can support the spike.

2. Prepare the ground: Clear any debris or obstacles from the chosen location. If necessary, use a shovel or garden tool to loosen the soil.

3. Insert the Earth Spike: Hold the Earth Spike firmly and push it vertically into the ground. Apply steady pressure while twisting the spike slightly to help it penetrate the soil. Continue pushing until the spike is fully inserted and only the top part is visible.

4. Secure the Earth Spike: If desired, you can use a rubber mallet or a similar tool to gently tap the top of the spike to ensure it is securely in place.

5. Connect the light source: The TRIO 9960-07 Earth Spike does not come with a light source included. You will need to purchase a suitable light bulb separately. Refer to the technical data provided in the manual for the maximum wattage allowed. Follow the instructions provided with the light source to connect it to the Earth Spike.

6. Test the installation: Once the light source is connected, turn on the power and check if the Earth Spike is functioning properly. Adjust the position of the light source if necessary to achieve the desired lighting effect.

Please note that this answer is based on the information provided in the product manual. For more detailed instructions or specific troubleshooting, it is recommended to refer to the manual or contact the retailer from whom you purchased the product.