User Manual Q&AAnswer
Mar 06, 2025 - 07:04 PM
To connect and use the DIGITUS DA-10063 Dual USB-C GaN Wall Chargers, please follow these steps:
1. Plug the DC connector of the power adapter into a socket.
2. Plug one USB connector of the cable into the interface of the charger.
3. Plug the other connector of the cable into your electronic device (such as a notebook, smartphone, or tablet).
4. Please pull the USB connector out after the electronic equipment is fully charged.
Here are some important notes to keep in mind:
- For optimum performance, please use the power adapter according to the user manual.
- Make sure to plug the power adapter into a socket with a voltage range of 100~240VAC.
- Always unplug the power adapter after use.
- Do not use the power adapter with an electronic product that does not match the specifications to avoid any potential problems.
- It is normal for the power adapter to become slightly overheated during use.
- If the power adapter stops working due to over-current, over-temperature, or short-circuit protection, unplug the device and check compatibility before using it again.
- Keep the power adapter away from fire and do not let it come into contact with liquid.
- Do not wash the power adapter with corrosive cleaner.
- If you encounter any issues with the power station, please contact the store or distributor in your area.
For more detailed information and specifications, please refer to the provided user manual.
Add New Comment