Answer

Mar 06, 2025 - 06:50 PM
To connect and configure the COREpar Q60 ILS for DMX operation, please follow these steps:
1. Read the Safety Notes in the instruction manual before proceeding.
2. Obtain a DMX controller and DMX cables.
3. Disconnect the product from power.
4. Connect the DMX controller to the DMX input on the COREpar Q60 ILS using a DMX cable.
5. Set the DMX address on the COREpar Q60 ILS. The highest recommended DMX address is 504 to ensure full access to all channels available in each DMX mode.
6. Configure the DMX controller to control the desired functions of the COREpar Q60 ILS. Refer to the DMX values section in the instruction manual for the function values and percentages.
7. Power on the COREpar Q60 ILS and the DMX controller.
8. Test the DMX operation to ensure the desired lighting effects are achieved.
Note: For more detailed instructions and information on DMX operation, please refer to the User Manual available for download from the CHAUVET DJ website.
Add New Comment