User Manual Q&AAnswer
Mar 06, 2025 - 06:34 PM
The Riester Ri-San Aneroid Sphygmomanometer is a palm-style blood pressure monitor that is easy to use. Here is a step-by-step guide on how to use it:
1. Prepare the cuff: Select the appropriate cuff size for the patient's arm. The Ri-San Aneroid Sphygmomanometer offers different sizes and versions of cuffs, including cotton bandage cuff, cotton hook cuff, and calibrated nylon velcro cuff. Ensure that the cuff is securely fastened around the upper arm, with the bottom edge about 2-3 cm above the elbow.
2. Inflate the cuff: Use the latex-free bulb provided to pump air into the cuff. Squeeze the bulb repeatedly until the cuff is inflated enough to stop the blood flow. The recommended pressure is around 180 mmHg.
3. Release the air: Locate the air release valve on the sphygmomanometer. It is conveniently regulated by finger-tip control. Slowly turn the valve counterclockwise to release the air from the cuff. The pressure gauge will show a gradual decrease in pressure.
4. Measure the blood pressure: Place the stethoscope on the brachial artery, just below the cuff's edge. Listen for the heartbeat sounds while watching the pressure gauge. The first sound you hear is the systolic pressure, and the point where the sound disappears is the diastolic pressure. Note the readings on the gauge.
5. Record the results: After obtaining the blood pressure measurements, record the systolic and diastolic values, along with the date and time.
6. Clean and store: After each use, clean the sphygmomanometer according to the manufacturer's instructions. Store it in the provided vinyl zippered case to protect it from damage.
Please refer to the Riester Ri-San Aneroid Sphygmomanometer manual for more detailed instructions and safety precautions.
Add New Comment