User Manual Q&AAnswer
Mar 06, 2025 - 06:26 PM
To inflate the Bestway 67922 TriTech Connect and Rest 3 in-1 Luftbett, follow these steps:
1. Locate the air valve on the bed.
2. Open the air valve by twisting it counterclockwise.
3. Insert the nozzle of the air pump into the valve.
4. Start pumping air into the bed using the air pump. Ensure that the pump is securely connected to the valve to prevent air leakage.
5. Continue pumping until the bed reaches your desired firmness.
6. Once the bed is fully inflated, close the air valve by twisting it clockwise.
To deflate the Bestway 67922 TriTech Connect and Rest 3 in-1 Luftbett, follow these steps:
1. Open the air valve by twisting it counterclockwise.
2. Press down on the bed to release the air and help deflate it.
3. If needed, use your hands to gently push the air out of the bed.
4. Once the bed is deflated, fold or roll it up for storage.
Remember, it is normal for airbeds to stretch and decrease in air pressure after the first several uses. If you notice a decrease in firmness, simply add more air to achieve your desired level of firmness. The air pressure will stabilize over several uses, and this does not indicate a leak in the airbed.
Add New Comment