Answer

Mar 06, 2025 - 06:23 PM
To inflate the Bestway 67226 Built In Foot Pump Air Bed, you have two options:
1. Built-in Foot Pump: Locate the foot pump on the air bed and remove the white rubber plug from the suction port. Depress the foot pump area by stepping on it to inflate the bed. Make sure to depress the pump straight down and ensure your foot completely covers the suction port to prevent air from escaping. Lift your foot off the hole to allow the suction port to refill the chamber. Continue this process until the bed reaches the desired firmness and most of the wrinkles are gone. Finally, insert the white rubber plug back into the suction port and xxxx on the plastic cover. The air bed is now ready for use.
2. Air Pump: If you have an air pump, open the valve on the air bed and use the air pump to inflate the bed. Once inflated, close the valve to seal the air inside. Please note that the air pump is not included with the product.
Remember, if the air bed loses firmness after use, you can add more air to increase its firmness.
For further details and visual references, please refer to the instructions provided in the manual for the Bestway 67226 Built In Foot Pump Air Bed.
Add New Comment