User Manual Q&AAnswer
Mar 06, 2025 - 06:06 PM
To install the SmartSolar Control display, follow these steps:
1. Remove the two screws of the plastic cover on the front of the solar charger.
2. Remove the plastic cover to expose the display terminal.
3. Remove the two plastic plugs on either side of the display plug.
4. Remove the paper backing of the double-sided tape on the back of the display.
5. Insert the display into the plug, making sure it is fully inserted.
6. xxxx the display down using the two screws that were used for the plastic cover.
7. If the display is used as a temporary display, you do not need to use the tape or xxxx it down.
8. The display is hot-swappable, meaning it can be plugged in or removed while the solar charger is operating.
For more detailed instructions and illustrations, refer to the SmartSolar Control Display User Manual.
Add New Comment