How do I install and mount the STAHL 8602C3-009-B Mushroom Stay Put Button With Key? (STAHL 8602C3-009-B Mushroom Stay Put Button With Key User Guide)

Answer

manuals.plus

Mar 06, 2025 - 06:05 PM

To install and mount the STAHL 8602C3-009-B Mushroom Stay Put Button With Key, follow these steps:

1. Determine the desired location for the button and ensure it meets the necessary environmental conditions specified in the manual.

2. Choose the appropriate mounting method based on your requirements:

- Front Installation Mounting: This method requires a jam nut (order no. 205592) and an installation wall with a maximum thickness of 5mm (0.197 inches). The actuator with seal is inserted into the installation wall, and a built-in element such as an LED element 8010/6 or a contact element 8082/3 can be added if needed.

- Mounting Rail Mounting: This method requires a jam nut (order no. 205592) and a mounting rail TS35. The actuator with seal is attached to the mounting rail, and a built-in element can be added as required.

3. Once the mounting method is chosen, refer to the dimensional drawings provided in the manual to determine the appropriate cut-out size for the actuator. The manual includes drawings for cut-outs with or without a front label.

4. If desired, you can add accessories such as spare keys, insert discs for label holders, label holders, protective collars, closing parts, pressure plates, or adaptors. The manual provides the corresponding part numbers for each accessory.

5. Follow the tightening torque specifications (3 Nm or 26.55 lbf in) when securing the actuator in place.

Please note that the above instructions are a general guide. For more specific details and illustrations, refer to the STAHL 8602C3-009-B Mushroom Stay Put Button With Key User Guide provided by the manufacturer.