Answer

Mar 06, 2025 - 06:04 PM
To mount the REOTEMP PR25 Heavy Duty Repairable Stainless Gauge with Tempered Glass on a panel or surface, follow these steps:
1. Ensure that the mounting surface is even. If it is uneven, insert washers under the flange of the gauge case to obtain a three-point suspension.
2. Refer to the applicable data sheet for panel openings and mounting dimensions specific to your gauge model, size, and case construction.
3. If your gauge has a blow-out back, make sure to provide a clearance behind the gauge equal to the area of the pressure relieving back. This can be achieved by either cutting a hole in the mounting surface equal to the diameter of the pressure relieving back or spacing the gauge away from the mounting surface to create an annular area equal to the area of the pressure relieving back.
By following these steps, you can properly mount the REOTEMP PR25 Heavy Duty Repairable Stainless Gauge with Tempered Glass on a panel or surface. For additional information and guidelines, please refer to the installation and operating instructions provided in the user manual.
Add New Comment