How do I set up the AOSU SolarCa P1 Lite Solar-Powered Wireless Security Camera? (aosu SolarCa P1 Lite Solar-Powered security camera User Guide)

Answer

manuals.plus

Mar 06, 2025 - 05:54 PM

To set up the AOSU SolarCa P1 Lite Solar-Powered Wireless Security Camera, follow these steps:

1. Download the Aosu App from the App Store (for iOS devices) or Google Play (for Android devices).
2. Sign up for an Aosu App account and follow the onscreen instructions to complete the setup.
3. Insert a Micro SD Card (8-512GB, class 10 level, FAT32 format) into the Micro SD Card Port of the camera. If you don't have a Micro SD Card, you can contact AOSU directly for assistance.
4. Make sure your Wi-Fi network is set to 2.4G. The camera only supports 2.4G Wi-Fi.
5. Open the Aosu App and go to Camera Settings > Mounting Guide to test the wireless signal strength. Move the camera and your phone to the location where you want to mount the camera and check the signal strength. Place the camera as close to the Wi-Fi router as possible for a better signal.
6. Mount the camera at a height of 7-10ft (78-118 inches) above the ground. This height maximizes the detection range of the motion sensor. Avoid placing the camera under direct sunlight.
7. Reserve 23cm of wire length and fix the bottom base to avoid wire damage when the camera turns.
8. Install the solar panel at an angle of 30-45° with the horizontal plane. Make sure the sun is not blocked by any items such as eaves or tree branches.
9. Test the Wi-Fi signal quality at the installation position using your cell phone to ensure a good Wi-Fi signal.
10. Drill holes according to the position sticker using a 15/64" (6mm) drill bit.
11. Insert the plugs and tighten the screws.
12. Connect the solar panel to the camera by opening the silicone cover at the bottom of the camera, removing the small center part of the cover, inserting the power cord through the opening, and plugging it into the USB-C Port. Close the cover, taking up any slack in the power cord from the solar panel.
13. Adjust the angle of the solar panel up to 90° for optimal sunlight exposure.
14. After installation, check that all locking mechanisms are tightly secured.

For more detailed instructions and tutorial videos on using the product, you can visit the AOSU website at aosulife.com. If you have any further questions or issues, you can contact AOSU customer support via email or phone using the provided contact information in the user guide.