Answer

Mar 06, 2025 - 05:50 PM
To connect the MXN204-TVI HD Multi-Purpose Camera Control Box to your cameras and power source, follow these steps:
1. Connect the power cable to the control box. The power cable has a red wire for power input (DC 10V ~32V) and a black wire for ground.
2. Connect your cameras to the control box using the provided cable bracket and screws. Fix the bracket jack with the provided xxxx after connecting the cameras.
3. Connect the trigger wires to the control box. The control box has six trigger inputs (green, yellow, white, blue, orange, and purple) for power input (DC 10V ~32V). Each trigger input corresponds to a specific camera or function.
4. Optionally, connect the trigger out wire to another device using the purple wire. This can be used to trigger another device with a DC12V output (max. 500mA).
5. Connect the RCA cable to the control box for video output. This cable will provide composite video output (1Vp-p 75Ω).
6. Connect the power cable to your power source (DC 10V ~32V).
Once connected, you can use the remote controller to control the control box and access various settings and functions.
Note: For more detailed instructions and illustrations, please refer to the MXN204-TVI HD Multi-Purpose Camera Control Box Owner's Manual.
Add New Comment