User Manual Q&AAnswer
Mar 06, 2025 - 05:49 PM
To install the SmartDHOME 4 in 1 Multi Sensor, follow these steps:
1. Remove the back cover of the sensor by unscrewing it.
2. Insert 2 CR123A batteries into the sensor, making sure the polarity is correct. Alternatively, you can power the sensor using the supplied Micro USB cable by inserting it into the appropriate slot.
3. Close the back cover only after you have included the device in the Z-Wave network.
Note: If you prefer to use a single CR123A battery, insert it into the slot marked with the number 1. However, please note that the battery will need to be changed more frequently compared to using two batteries.
For more detailed instructions on including or excluding the device from a Z-Wave network, resetting the device, or disposing of the device, please refer to the user manual provided with the product.
If you encounter any technical problems or malfunctions, you can visit the SmartDHOME website and register to open a ticket for customer support.
Add New Comment