User Manual Q&AAnswer
Mar 06, 2025 - 03:35 AM
To assemble the transport device for the scheppach SG3200 Power Generator, follow these steps:
1. Guide the wheel axle through the guide until it latches.
2. Guide the wheel onto the wheel axle and fasten it with a washer and spring washer, and then tighten it with a hexagonal nut.
3. Mount the support foot on the frame strut at the bottom. Fasten the support foot with two screws and nuts.
4. Mount the transport handles on the frame. Fasten the transport handles with a xxxx and nut, and place plastic washers between the frame and fork of the transport handle.
For more detailed instructions and illustrations, please refer to the "Attachment / Before starting the equipment" section in the scheppach SG3200 Power Generator installation guide.
Add New Comment