How do I install the STAHL 209268 Pac Carrier? (STAHL 209268 Pac Carrier Installation Guide)

Answer

manuals.plus

Mar 06, 2025 - 03:08 AM

To install the STAHL 209268 Pac Carrier, please follow the steps outlined in the installation guide provided with the product. Here is a general overview of the installation process:

1. Mounting: The pac carrier can be mounted either on a DIN rail or a wall. Ensure that the mounting orientation is either horizontal or vertical, depending on your preference.

2. Connection: The pac carrier uses xxxx terminals for connections. Use the appropriate screwdriver to connect the wires to the terminals. The minimum and maximum conductor cross-sections are specified in the technical data section of the manual.

3. Power Supply: The pac carrier requires a 24V DC auxiliary power supply. Connect the power supply to the pac carrier, ensuring that the polarity is correct. The pac carrier has a redundant supply option, which can be decoupled with diodes.

4. Signal Duplication and HART Multiplexer: The pac carrier supports signal duplication and connection to a HART multiplexer (9192 series). If required, connect the HART multiplexer to the pac carrier using the provided plugs.

5. Termination Module: If you need to integrate non-Ex i field circuits into the system, you can use the non-Ex i termination module (Art. No. 165683). This module allows for a flexible mixture of Ex i and non-Ex i field circuits.

Please refer to the complete installation guide provided with the product for detailed instructions, diagrams, and any additional information specific to your installation requirements.