User Manual Q&AAnswer
Mar 06, 2025 - 03:04 AM
To install the STAHL 8573D Plug 16 A Extra Low Voltage, please follow these steps:
1. Ensure that the power source is turned off before starting the installation process.
2. Prepare the cables that need to be connected to the plug. The plug is designed for 2- or 3-pole applications.
3. Strip the insulation from the end of the cables to expose the conductors.
4. Open the plug by unscrewing the screws on the plug housing.
5. Insert the stripped ends of the cables into the appropriate xxxx terminals inside the plug. Make sure that the conductors are securely connected and there is no exposed wire outside the terminals.
6. Tighten the screws on the xxxx terminals to secure the cables in place. Ensure that the connections are tight to ensure optimum electrical contact.
7. Close the plug by screwing the housing back together.
8. Once the plug is securely closed, you can connect it to the appropriate socket or device.
9. Before turning on the power, double-check all connections to ensure they are properly installed and secure.
Please note that this is a general guide for installation. For more specific instructions and safety precautions, please refer to the STAHL 8573D Plug 16 A Extra Low Voltage Installation Guide provided by the manufacturer.
Add New Comment