User Manual Q&AAnswer
Mar 06, 2025 - 03:03 AM
To install the STAHL 257780 16A Plug, please follow the steps below:
1. Ensure that the power supply is turned off before starting the installation process.
2. Strip the outer insulation of the cable to expose the individual wires.
3. Insert the cable through the cable gland of the plug.
4. Connect the individual wires to the corresponding xxxx terminals inside the plug. Ensure that the correct polarity is maintained.
5. Tighten the xxxx terminals securely to ensure proper electrical contact.
6. Once the wiring is complete, insert the plug into the corresponding socket, ensuring that the floating pins align correctly.
7. Use the pivoting strain relief to secure the cable and prevent strain on the wires.
8. Double-check all connections and ensure that they are secure.
9. Turn on the power supply and test the plug for proper functionality.
Please note that this is a general installation guide. For more specific instructions and safety precautions, refer to the official STAHL 257780 16A Plug Installation Guide provided by the manufacturer.
Add New Comment