Answer

Mar 06, 2025 - 03:02 AM
To change the filters on the ALORAIR PureAiro HEPA Pro 970 Air Scrubber, follow these steps:
1. Ensure that the unit is turned off and unplugged from the power source.
2. Locate the filter compartment on the unit. It is usually located at the back or side of the air scrubber.
3. Open the filter compartment by removing any latches or screws that secure it.
4. Take out the old filters from the compartment. The ALORAIR PureAiro HEPA Pro 970 Air Scrubber has both a pre-filter and a HEPA/activated carbon filter.
5. Dispose of the old filters properly.
6. Take the new filters and insert them into the filter compartment. Make sure they are properly aligned and fitted.
7. Close the filter compartment and secure it with latches or screws.
8. Plug the unit back into the power source and turn it on.
Note: The ALORAIR PureAiro HEPA Pro 970 Air Scrubber has a filter change light that indicates when the HEPA/activated carbon filter needs to be changed. It is recommended to follow the manufacturer's guidelines for filter replacement intervals to ensure optimal performance of the air scrubber
Add New Comment