How do I install the ALORAIR VentirPro-S2 Ventilator Fan in my crawl space? (ALORAIR VentirPro-S2 Ventilator Fan Instruction Manual)

Answer

manuals.plus

Mar 06, 2025 - 02:01 AM

To install the ALORAIR VentirPro-S2 Ventilator Fan in your crawl space, follow these steps:

1. Choose the location: Select a suitable location in your crawl space where you want to install the fan. Ensure that there is enough space and proper ventilation for the fan to function effectively.

2. Mount the fan: Use the provided wall anchors to securely mount the fan system on the wall or any other suitable surface. Make sure the fan is positioned in a way that allows air circulation throughout the crawl space.

3. Connect the thermal probe: Connect the thermal probe to the fan system. The thermal probe is responsible for monitoring the temperature and humidity levels in the crawl space.

4. Connect the power adapter: Plug the power adapter into a power outlet and connect it to the fan system. The rated voltage for the fan is 110V-230V, 50/60Hz.

5. Adjust the settings: The operation panel of the fan system allows you to adjust various settings such as wind speed, time, temperature, and humidity. Set the desired values based on your requirements.

6. Ensure proper placement of the temperature and humidity probe: It is important to install the temperature and humidity probe in the same space as the equipment. Make sure the probe is not exposed to moisture or any potential damage.

7. Start the fan: Once the installation is complete and the settings are adjusted, the fan will start operating automatically. It will continuously ventilate the crawl space, reducing moisture and humidity levels.

For any further assistance or troubleshooting, you can refer to the ALORAIR VentirPro-S2 Ventilator Fan Instruction Manual or contact ALORAIR's dedicated after-sales service team.