Answer

Mar 06, 2025 - 01:52 AM
To connect the TOA IP-A1PG IP Paging Gateway to a PoE switching hub, follow these steps:
1. Prepare a LAN cable (straight UTP or STP cable, rated at Category 5 or greater) and connect one end to the LAN port of the IP Paging Gateway.
2. Connect the other end of the LAN cable to the PoE switching hub.
3. Ensure that the PoE switching hub is compatible with PoE (IEEE802.3af Class 3) specifications.
4. The IP Paging Gateway will be powered by the PoE switching hub.
Note: It is important to read the safety precautions and installation instructions in the manual before connecting and using the IP Paging Gateway.
Add New Comment