How do I install the i-PRO WV-QCL102 Universal Camera Mounting Bracket? (i-PRO WV-QCL102 Universal Camera Mounting Bracket Instruction Manual)

Answer

manuals.plus

Mar 06, 2025 - 01:51 AM

To install the i-PRO WV-QCL102 Universal Camera Mounting Bracket, please follow the steps outlined in the operating instructions:

Step 1: Preparations
- Refer to the operating instructions of the camera for details on installing the safety wire (camera accessory).

Step 2: Machining the installation surface

Step 3: Fixing the bracket
- Use four mounting screws (M6) with a minimum pull-out strength of 562 N (126.34 lbf) per xxxx to fix the bracket securely.

Step 4: Fixing the camera
- Loosen the fixation of the movable part by turning the hexagonal hole with a hexagonal wrench (3 mm on each side).
- Attach the camera to the head portion of the bracket.

Step 5: Mounting the camera chassis
- Put the mounting hole of the mounting chassis on the anchor bolt.

Step 6: Adjusting the camera orientation
- With power connected to the camera, connect a monitor to the MONITOR OUT terminal to bring up the screen. For models without a MONITOR OUT terminal, use a PC to connect the camera to the network and display the shooting screen.
- Adjust the camera orientation as desired.
- Tighten the fixation of the movable part by turning the hexagonal hole with a hexagonal wrench (3 mm on each side). Recommended tightening torque is 1.97 N·m (1.45 lbf·ft) with a maximum of 2.95 N·m (2.17 lbf·ft).

Step 7: Fixing the safety wire (camera accessory)
- Use mounting screws (M4) with a minimum pull-out strength of 562 N (126.34 lbf) per xxxx to fix the safety wire securely.

Please note that these instructions are a summary, and it is important to refer to the complete operating instructions manual for detailed information and illustrations