User Manual Q&AAnswer
Mar 06, 2025 - 01:46 AM
To install the handlebar on the Eleglide M1 Plus Electric Bike, follow these steps:
1. Take out the bike and make it stand up.
2. Open the stem clamp by loosening the screws on it.
3. Place the handlebar in the right position and make sure the clamp is in the middle of the bar.
4. Close the clamp and secure the handlebar by tightening the screws.
For a visual guide, you can refer to the "Assembly Guide" section in the user manual, which provides step-by-step instructions with illustrations.
Note: It is important to ensure that the handlebar is securely installed to ensure safe and comfortable riding.
Add New Comment