How do I set the desired temperature on the Electrolux EIFH/C-2 EEC and EIFH/C-3 EEC PTC Heater? (Electrolux EIFH/C-2 EIFH/C-3 PTC Heater User Manual)

Answer

manuals.plus

Mar 06, 2025 - 01:43 AM


To set the desired temperature on the Electrolux EIFH/C-2 EEC and EIFH/C-3 EEC PTC Heater, follow these steps:

1. Before turning on the fan heater, make sure the switch key is in position "2" and the thermostat  xxxx  is turned to the extreme counterclockwise position.

2. Connect the mains plug to the mains socket.

3. Set the switch button to position "1" (mode "1") to turn on the fan heater.

4. If the ambient temperature is higher than the one set by the thermostat, the fan heater will work in ventilation mode without heating. If the ambient temperature is lower than the set temperature, the fan heater will operate in the ventilation mode with heating.

5. The thermostat  xxxx  sets the required air temperature in the room. Turn the thermostat  xxxx  clockwise to increase the desired temperature and counterclockwise to decrease it.

6. The thermostat maintains the set temperature by automatically turning off and on the electric heater. The approximate range of the maintained temperature is from 0 to +40 °C.

7. For comfort mode, set the thermostat control  xxxx  to the "max" position to turn on the appliance at full power. When the room temperature reaches a comfortable level, slowly turn the thermostat control  xxxx  counterclockwise until you hear a click. The device will then remember the temperature and maintain it by automatically switching on and off.

Please refer to the user manual for more detailed instructions and safety precautions.