Answer

Mar 06, 2025 - 01:28 AM
To switch on the HILTI PM 2-PE Point Laser, slide the on/off switch backward. The laser beams will be activated. To switch off the tool and laser beams, slide the on/off switch forwards. The tool will automatically switch off after approximately 15 minutes of inactivity. If you want to deactivate the automatic power-off feature, switch the tool on and off, then on again within 3 seconds. The laser beam will flash five times to confirm deactivation. Please refer to the HILTI PM 2-PE Point Laser Instruction Manual for more detailed instructions and safety precautions.
Add New Comment