How do I install the FISHER PAYKEL door panel on my Integrated Refrigerator Freezer? (FISHER PAYKEL Door Panel Integrated Refrigerator Freezer User Guide)

Answer

manuals.plus

Mar 06, 2025 - 01:23 AM

To install the on your Integrated Refrigerator Freezer, please follow these steps:

1. Ensure that the refrigerator freezer is turned off and unplugged from the power source before starting the installation process.

2. Remove the existing door panel (if applicable) by unscrewing the screws or releasing any clips that hold it in place. Refer to the user manual of your specific model for detailed instructions on removing the door panel.

3. Align the FISHER PAYKEL RD3684A door panel with the front of the refrigerator freezer. Make sure it is centered and level.

4. Secure the door panel to the refrigerator freezer using the provided screws or clips. Refer to the user manual for the specific installation method recommended for your model.

5. Once the door panel is securely attached, check for any gaps or misalignment. Adjust as necessary to ensure a proper fit.

6. If desired, you can now install a handle option and toe kick accessory to complete the look of your integrated refrigerator freezer. Refer to the user manual for instructions on installing these additional accessories.

7. After the installation is complete, plug in the refrigerator freezer and turn it on. Check that the door panel is functioning properly and that the refrigerator freezer is cooling as expected.

Please note that the above instructions are a general guideline. It is important to refer to the user manual provided with your specific model for detailed and model-specific installation instructions. If you have any further questions or concerns, it is recommended to contact Fisher & Paykel's Customer Care Centre for assistance.