How do I adjust the brightness and color of the Elgato Light Strip using the Control Center app? (Elgato Light Strip User Guide)

Answer

manuals.plus

Mar 06, 2025 - 01:02 AM


To adjust the brightness and color of the Elgato Light Strip, you can use the Control Center app. Here's how:

1. Download and install the Control Center app on your Mac, Windows, iOS, or Android device.
2. Connect the LED strip to the controller, and then connect the controller to the power supply and plug it into a power outlet. The Light Strip will enter pairing mode and quickly color cycle.
3. Launch the Control Center app and pair the Light Strip by clicking the "+" icon. The Control Center app will guide you through the setup process.
   - For Wi-Fi pairing using a Mac, turn on your Light Strip, click the Wi-Fi icon in the top right Status menu, and select your new accessory. Complete the Airport Utility setup process, and your Light Strip will be accessible from the Elgato Control Center.
4. Once paired, you can use the Control Center app to switch the Light Strip on/off, adjust brightness, fine-tune color, and set temperature.
   - If your PC is not equipped with Wi-Fi, you can use the Elgato Control Center app on your iOS or Android device to add the Light Strip. A Wi-Fi connection is only needed for the initial pairing. Once paired, you can control the Light Strip via any wired or wireless device on your network.

Please refer to the user guide for more information and detailed instructions on using the Control Center app and other features of the Elgato Light Strip.