User Manual Q&AAnswer
Mar 06, 2025 - 12:50 AM
According to the PERLIGHT PLM-415OM6B-60 Solar Panel Installation Guide, it is recommended to clean the module surface regularly to ensure optimum performance. Here are the cleaning instructions:
1. Frequency: The frequency of cleaning depends on the rate of dirt build-up. Under normal conditions, rain will clean the surface of the module, but it is still required to regularly clean the module surface using a soft sponge or cloth (dry or wet).
2. Cleaning Method: Never use a rough surfaced material to clean the modules, and do not use acid and alkali cleaners to remove dirt. Avoid pressing hard during cleaning, as it may cause glass deformation, cell damage, and reduction of the module's life.
3. Snow Removal: During snowfall, remove the snow covering the module in a timely manner to avoid damage caused by long-term accumulation and freezing of melted snow.
4. Safety Precautions: When cleaning the modules, it is recommended to cover the front surface of the solar module with an opaque or other material to prevent exposure to sunlight. Solar modules generate high voltage when exposed to sunlight, which can be dangerous.
Please note that these are general cleaning guidelines. For specific instructions and safety precautions, please refer to the PERLIGHT PLM-415OM6B-60 Solar Panel Installation Guide provided by the manufacturer.
Add New Comment